Lan mode, Refresh server list, Connect – Asus Z92U User Manual
Page 67: Pause
67
Software
Utilities
LAN Mode
There are two kinds of client mode: LAN or WAN, the
following describes LAN mode.
Refresh Server List
To start, press Refresh Server List button to find out all the available servers in the LAN area. Available
servers will be displayed in the server list.
Connect
Click the radio select button in the server list to choose a server which you want to connect to. Enter a
password if the server needs one, then press Connect button to connect with it.
Note: All settings (such as nickname, hotkeys, enable sound detection, and capture device, etc.)
must be set before starting a connection. Once the connection is built, settings cannot be changed.
If the connection is successful, you will see a waiting animation like this :
After a few seconds, it will start the audio/video communication.
Pause
The "Pause" button will pause your video and audio capturing, which means other people cannot see or hear
you when you pause, you can press it again to resume capturing.
Disconnect
Press the "Disconnect" button to break the connection and quit.