Asus PU500CA - Manual (Page 72)

Updating the BIOS.
1. Please verify the Notebook PC’s exact model and download the
latest BIOS file for your model from the ASUS website and save
it in your flash disk drive.
2. Connect your flash disk drive to the Notebook PC and power on
the Notebook PC.
3. From the BIOS Setup program, click Advanced > Start Easy
Flash, then press [Enter].
4. Locate the latest BIOS file and start updating the BIOS.
ASUSTek Easy Flash Utility
[ ]: Switch [ ] : Choose [q] : Exit [Enter]: Enter/Execute
0 EFI <DIR>
FLASH TYPE: Winbond 25X/Q Series
Current BIOS
Platform: P500CA
Version: 100
Build Date: Nov 1 2012
Build Time: 09:53:29 New BIOS
Platform: Unknown
Version: Unknown
Build Date: Unknown
Build Time: Unknown
5. After the BIOS update process, click Exit > Restore Defaults to
restore the system to its default settings.
Version 2.12.1219. Copyright (C) 2011 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Main
Advanced Chipset Boot Security Save & Exit
POST Logo Type [Static]
Start Easy Flash
Play POST Sound [No]
Speaker Volume [4]
Internal Pointing Device [Enabled]
Wake On Lid Open [Enabled]
Power Off Energy Saving [Enabled]
ASUS USB Charger+ in battery mode [Disabled]
Intel Virtualization Technology [Enabled]
Intel AES-NI [Enabled]
VT-d [Enabled]
SATA Configuration
Graphics Configuration
Intel (R) Anti-Theft Technology Configuration
USB Configuration
Network Stack
Press ENTER to run the utility
to select and update BIOS.
FS0
FS1
→← : Select Screen
↑↓ : Select Item
Enter : Select
+/— : Change Opt.
F1
: General Help
F9 : Optimized Defaults
F10 : Save
ESC : Exit