Asus K8V - Manual (Page 85)

ASUS K8V motherboard 3-15
3.5.3 Creating a RAID 0 array (Performance)
1. In the FastBuild™ utility main menu, press <1> to select Auto Setup. The
following screen appears.
2. Use the arrow keys to go to the field Optimize Array for and select
Performance with the space bar. The Mode field displays “Stripe”.
3. After making a selection, press <Ctrl+Y> to save and create a RAID 0 array.
4. Press any key to reboot the system. During the boot process, the
MBFastTrak376 BIOS checks and displays the disk array information.
5. Once the array is created, use the FDISK utility to format the array as a single
hard drive.
6. After you have formatted the arrayed drives, install an operating system (OS).
The OS will treat the RAID 0 array as a single drive unit.
7. Install the RAID driver from the support CD that came with the motherboard
package.
FastBuild (tm) Utility 2.00 (c) 2002-2005 Promise Technology, Inc.
[ Keys Available ]
[ Auto Setup Options Menu ]
[ ] Up [ ] Down [ , ,Space] Change Option [ESC] Exit [CTRL-Y] Save [ ] Up [ ] Down [ , ,Space] Change Option [ESC] Exit [CTRL-Y] Save
Mode ........................................
Spare Drive.................................. 0
Drive(s) Used in Array....................... 2
Array Disk Capacity (size in MB)............. 8650
[ Array Setup Configuration ]
Stripe
Optimize Array for: Performance
Depending on the operating system you are installing, you may need to install
the RAID driver during or after the OS installation.