Asus TS100-E6/PI4 - Manual (Page 25)

2-7 ASUS TS100-E6/PI4
2.2.2 Installing the CPU heatsink and fan
To install the CPU heatsink and fan:
Orient the heatsink and fan assembly such that the CPU fan cable is closest to
the CPU fan connector.
1. Place the heatsink on top of the
installed CPU, ensuring that the
four fasteners match the holes on
the motherboard.
2. Push down two fasteners at a time
in a diagonal sequence to secure
the heatsink and fan assembly in
place.
A
A
B
B
1
1
A B
B A
3. Connect the CPU fan cable to the connector on the motherboard labeled
CPU_FAN.
DO NOT forget to connect the CPU fan connector! Hardware monitoring errors
can occur if you fail to plug this connector.