Asus Rampage II Extreme - Manual (Page 127)

ROG Rampage II Extreme 3-45
Select Screen
Select Item
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
v02.61 (C)Copyright 1985-2007, American Megatrends, Inc.
O.C. PROFILE Configuration
O.C. Profile 1 Status :Not Installed
O.C. Profile 2 Status :Not Installed
O.C. Profile 3 Status :Not Installed
O.C. Profile 4 Status :Not Installed
O.C. Profile 5 Status :Not Installed
O.C. Profile 6 Status :Not Installed
O.C. Profile 7 Status :Not Installed
O.C. Profile 8 Status :Not Installed
Add Your CMOS Profile.
Name: [ ]
Save To: [Uninstalled]
Load CMOS Profiles.
Load From: [Blank]
Start O.C. Profile
Typing your profile
name, [0-9][a-z][A-Z]
are acceptable.
3.8.2 ASUS O.C. Profile
This item allows you to store or load multiple BIOS settings.
Add Your CMOS Profile
Allows you to save the current BIOS file to the BIOS Flash. In the Name sub-item,
type your profile name and press <Enter>, and then choose a profile number to
save your CMOS settings in the Save to sub-item.
Load CMOS Profiles
Allows you to load the previous BIOS settings saved in the BIOS Flash. Press
<Enter>, and choose a profile to load.
Start O.C. Profile
Allows you to run the utility to save and load CMOS. Press <Enter> to run the utility.
ASUSTek O.C. Profile Utility V1.25
Restore CMOS
A:
Note
[Enter] Select or Load [Tab] Switch [V] Drive Info
[Up/Down/Home/End] Move [B] Backup [Esc] Exit
PATH: A:\
BOARD: Rampage II Extreme
VER: 0405
DATE: 10/15/08
BOARD: Unknown
VER: Unknown
DATE: Unknown
• This function can support devices such as USB flash disk or floppy
disk with FAT 32/16 format and single partition only.
• DO NOT shut down or reset the system while updating the BIOS to
prevent the system boot failure!
BIOS SETUP UTILITY
Tools
Current CMOS