Asus KFN5-Q/SAS - Manual (Page 139)

5-32 Chapter 5: RAID configuration
4. To remove the boot designator, move the cursor to the disk and press
Alt+B. This controller will no longer have a disk designated as boot.
5. To change the boot disk, move the cursor to the new boot disk and
press Alt+B. The boot designator will move to this disk.
The firmware must be configured correctly in order for the Alt+B feature
to work.
5.3.6 Global_Properties
From the Setup Utility screen, press <Ctrl+C) to enter the LSI Logic
Configuration, then select Global Properties. The Global Properties menu
allows you to change related settings.
Pause When Boot Alert Displayed
Sets whether to pause when the boot alert displays.
Configuration options: [Yes] [No]
Esc = Exit Menu F1/Shift+1 = Help
Allt+N = Global Properties -/+ = Alter Boot Order Ins/Del = Alter Boot List
LSI Logic Config Utility v6.08.05.00 (2006.08.02)
Adapter List Global Properties
Adapter PCI PCI PCI PCI FW Revision Status Boot
BUS Dev Fnc Slot
SAS1068 05 03 00 00 1.15.00.00-IR Disabled 0
Esc = Exit Menu F1/Shift+1 = Help
Allt+N = Adapter List -/+ = Change Item
LSI Logic Config Utility v6.08.05.00 (2006.08.02)
Adapter List Global Properties
Pause When Boot Alert Displayed [No]
Boot Information Display Mode [Display adapters & installed devices]
Support Interrupt [Hook interrupt, the Default]
Restore Defaults