AVSL 154.092 DM-X12 - Manual (Page 11)

Action : Action :
2) Press and hold FINE & MODE buttons together
to access the channel assignment mode ,then
press the SCANNER button
1) press and hold the PROGRAM button until the led
blinks
3) Use the Bankup/Down buttons to select pan/tilt
Notes : Notes :
You can permanently reverse the output of any given
channel on the controller.
Press AUTO/DEL&MODE buttons together to delete the
reverse channel.
3.1.7 FADE TIME ASSIGN 3.1.7 FADE TIME ASSIGN
You can choose whether the board s fade time during scene execution is implemented broadly to all
output channels or only to the Pan & Tilt movement channels. This is relevant because often you will
want gobos and colors to change quickly while not affecting the movement of the light.
Action : Action :
2) Hold the MODE and TAP DISPLAY buttons
simultaneously.
1) Turn OFF the controller.
3) Turn ON the controller.
Notes : Notes :
4) Press the TAP DISPLAY button to toggle between
the two modes. Either ALL CH (all channels) or
ONLY X/Y (Pan & Tilt only)
5) Press MODE and TAP DISPLAY to save settings.
All LEDS will blink to confirm.
ALL CH: All channels ONLY X/Y: Only Pan & Tilt
3.1.6 REVERSE CHANNEL OUTPUT 3.1.6 REVERSE CHANNEL OUTPUT
4) Press the TAP/DISPLAY button to switch between
pages
3.2 Operation 3.2 Operation
3.2.1 MANUAL MODE 3.2.1 MANUAL MODE
The manual mode allows direct control of all scanners. You are able to move them and change
attributes by using the channel faders and wheel.
Action : Action :
2) Select a SCANNER button.
1) Press the AUTO DEL button repeatedly until the
MANUAL LED is lit.
3) Move wheel and faders to change fixture attributes.
Notes : Notes :
All changes made while in Manual Mode are
temporary and will not be recorded.
PAGE/SELECT A/B button:
Use to switch between fader control of (A: Ch1~8),
(B: Ch 9~16)
TAP DISPLAY button:
Press to toggle the output indicator on the LCD display
between DMX values (0-255) and percentage (0-100)
10/20
5) press and hold MODE button,then press the SCENES
buttons to select the DMXchannel.All LEDs will blink.
6) Press and hold FINE & MODE buttons(2)times to exit
DMX 512 CONTROLLER SERIES
USER MANUAL