Infinity Drain LT5-2 Series Submittal Sheet - Manual

LTD 5 Series
LTD 5│Tile Drain Series
- 16 gauge 304 Stainless Steel top with ABS Base
- Indoor or outdoor use
- Residential grade drain body (Cast Iron, PVC or ABS) with 2” throat
- Uses Hot Mop, Lead Pan, PVC Vinyl Liner, Rubber Liner (ChloraloyTM)
Copper Pan or Fiberglass waterproofing
- Grate can be removed completely for cleaning
- Accepts flooring material up to 3/8”
- Requires traditional 4-way floor pitch
- Integral hair strainer
- Flow rate 8 GPM
Complete Kits:
LTD5-2I SS Clamp Down Drain Cast Iron
LTD5-2I PS Clamp Down Drain Cast Iron
LTD5-2A SS Clamp Down Drain ABS
LTD5-2A PS Clamp Down Drain ABS
LTD5-2P SS Clamp Down Drain PVC
LTD5-2P PS Clamp Down Drain PVC
Components:
LT5-2 SS 5” x 5” Strainer Only
LT5-2 PS 5” x 5” Strainer Only
CDI 22 Clamp Down Drain Cast Iron
CDA 22 Clamp Down Drain ABS
CDP 22 Clamp Down Drain PVC
Dimension are subject to Manufacturers tolerance and change without notice. We can assume no responsibility for use of superseded or void data.
Infinity Drain
18 Secatoag Avenue
Port Washington, NY 11050
Phone: 516.767.6786
Fax: 516.740.3066
www.InfinityDrain.com
REV. 08.01.2013
Note: Installer must verify all rough-in
dimensions prior to installation and consult
local and national codes. Conformity and
compliance to local and national codes
are the responsibility of the installer.
Page 1 of 2
Finishes:
_____
Satin Stainless
_____
Polished Stainless
Installation (TD) Center Drain