Alpha Technologies Cordex Controller Panel Mount_Rack Mount 125_220Vdc - Manual (Page 11)

Argus Technologies Ltd. 018-570-C0 Rev B WC
Printed in Canada. © 2005 Argus Technologies Ltd. ARGUS and CORDEX are trademarks of Argus Technologies Ltd. All Rights Reserved. Page 1 of 14
1 Introduction
1.1 Scope of the Manual
This instruction manual explains the installation and interconnection of the Cordex System Controller (CXC)
125/220Vdc panel (CXCP) and rack (CXCR) models from Argus Technologies.
NOTE: To aid the user with installation, frequent reference is made to drawings located at the rear of this manual.
1.2 Product Overview
The CXC 125/220Vdc is an advanced system controller designed by Argus for operation with 125/220Vdc power
systems.
The CXCP and CXCR models each provide four digital and nine analog inputs that may be used to monitor a
wide range of power system components.
The CXCP and CXCR models allow the user to configure, monitor and control the entire DC power system from a
touch screen display similar to that used in a Personal Digital Assistant (PDA). Other features include temperature
compensation, auto equalization, remote access, dial out on alarm, battery diagnostics, as well as Web server
and SNMP support for configuration and monitoring.
NOTE: Separate documentation will be provided detailing the CXC software features, setup and operation.
The CXC offers additional advanced features via add-on “list options.” The customer should include these list
options at the time of ordering.
1.3 Part Numbers and List Options
Refer to the specifications section at the front of this manual for part numbers and ordering options.
Figure 1–Front view of Cordex controller 19” rack model CXCR
Latch (2PL)
Touch Screen
Reset Button
RS-232 (Craft Port)
LEDs