I-View DM-650IR-F40 IR Dome Waterproof UTP Camera - Manual

1
„ DM-650IR-F40 IR Dome Camera Function Description:
1.) Sensor: To detect the luminance of environment, the LED will be turned on when lower than 0.5 Lux.
2.) Lens: 4 mm IR Lens. Provide 6mm/8mm as alternative choice.
3.) Side Screw: Screw the camera housing; lose the screw to change the pan/tile view angle.
4.) IR LED: Built in 36 pcsψ5 IR LED, the illuminate distance up to 25 meters.
5.) Mounting Hole: There are 3 holes to fix the camera housing on the ceiling.
6.) Gutter: To fix the wire cable of camera.
7.) Indicator: Power indicator, Green LED On: Power on. Green LED Off: No Power. Yellow LED: Reserve
8.) RJ-45 connector: To transmit Power and Video signals via UTP cable. Please refer to the RJ45 pin assignment.
9.) OSD cable socket: To Connect OSD control cable for camera parameters setting. Please refer to OSD menu
„ Standard Accessories
¾ PRX-120VP Video/Power Balun for DVR site x 1 pc.
¾ Screws to fix camera housing x 4 pcs.
¾ L-Wrench screwdriver x 1 pc
¾ Menu x 1 pc
„ PRX-120VP Function Description: (On DVR site)
1.) RJ-45 connector: To transmit Power and Video signals via UTP cable. Please refer to the pin assignment.
2.) LED: Power indicator, LED On: Power on. LED Off: Not enough power or No Power.
3.) BNC Cable: For video output to DVR.
4.) Terminal Blocks: Power input for power transmission. Accept power range DC 24V or AC 24V-28V.
5.) RJ-45 pin Assignment: Connect the 4-pair UTP cable between DVR site and camera end for video/power transmission.
WARNING: This camera MUST use DC 24V power adapter for power transmission.
V1.0
RJ-45 Connector Pins Assignment
5
Front Panel PRX-120VP Back Panel
1 2 3 4
9
6
4
5
5
5
2
7
8
3
1
3 3