Lexibook RCD170BB - Manual (Page 10)

11
Slide the BAND switch 1 to select AM,
FM or FM ST. (Stereo). Tune a desired
station by turning the TUNING control 2 .
NOTES:
• If you select FM ST. and you tune to a
FM Stereo station, the FM ST.
indicator will light.
• If you are listening to a weak FM
Stereo station, you can usually
improve the reception by sliding the
BAND switch from FM ST. to FM (the
sound will now be in mono).
Slide the FUNCTION switch to the
RADIO position to turn the unit on and
select Radio mode; the POWER
indicator will light.
1
1
1 2
2
Adjust the VOLUME control as desired.
1 1
3
To turn the radio off, slide the
FUNCTION switch to the OFF position;
the POWER indicator will turn off.
1
4
LISTENING TO THE RADIO
10
ANTENNAS
AM–This unit has a built-in ferrite rod antenna, which provides adequate reception
in most areas. If reception is weak, turn the unit to improve reception.
FM–The FM Telescopic Antenna is for FM reception only. If reception is weak,
adjust the length and the angle of the antenna.
OPERATION
English
RCD170BB_02IM0449.qxd:CD2849.QXD 27/10/09 17:13 Page 10