Lexibook DJ013 Series - Manual (Page 13)

ENGLISH
13
- Make sure the camera is not connected to your computer before installing the
driver and the software.
TURNING THE CAMERA ON AND OFF
1. Press the Power on/off button to turn the camera on. The camera will make a
beep sound to confirm that it is ready for use.
2. Press and hold the Power on/off button for a few seconds again to turn it off.
3. To turn the unit off, you can also press repeatedly the MODE button until “Off” is
displayed on the LCD screen. Then press the shutter button to confirm.
Note : The camera will auto power off after 30 seconds of inactivity.
TAKING PHOTOS
Single shooting
You are already in “Single shooting” mode when you switch on the camera. Press
the shutter button to take a photo. The camera will beep to confirm that a picture is
taken. The number of pictures that you can take in memory is shown on the LCD
screen.
Continuous shooting
1. When you are in “Single shooting” mode, press the MODE button repeatedly until
the “Continuous shooting”
mode icon is displayed in the upper-right corner of
the screen. Press the shutter button within the next 5 seconds to take 3 pictures
continuously.
Note: When the camera’s built-in memory is full, the unit will play a double “beep”
sound when you press the shutter button to indicate that you can’t take any new
pictures.
Self-timer
1. In “Single shooting” mode, press repeatedly the MODE button repeatedly until
the “Self-timer” icon appears on the LCD screen. Then press the shutter button
within 5 seconds to turn on the self-timer function.
2. The digital camera will take a picture 10 seconds later.
Note: The self-timer feature is automatically turned off after the picture has been
taken.