Lexibook DJ023 Series - Manual (Page 18)

ENGLISH
18
SELECTING THE LIGHT SOURCE FREQUENCY
A higher frequency increases the camera shutter speed so the effect of light
fluctuations from sources such as florescent lamps is reduced.
1. Press the “Power/Mode” key once then use the “Up” and “Down” keys to select
the “Frequency” icon .
2. Press the Shutter key repeatedly to select the desired frequency: “50HZ” or
“60HZ”.
3. Press the “Power/Mode” key to go back to camera mode.
CAPTURING VIDEO CLIPS (Video Mode)
1. Press the “Power/Mode” key.
2. Press the Shutter key repeatedly until the video icon
is displayed on screen.
3. Press the “Power/Mode” key one more time to go to video.
4. Press the Shutter key to start shooting videos. The recording length is displayed
on the LCD screen.
5. Press the Shutter key again to stop recording and automatically save the video in
AVI format.
6. To go back to “Single shooting” mode, repeat steps 1 and 2 above pressing
repeatedly the Shutter key until the icon is displayed on screen. Then press the
“Power/Mode” key to go back to camera mode.
Note:
• The flash is disabled in video mode.
• You can use Media player and Quick time (not included on the software CD to play
AVI files on your computer.
PLAYBACK MODE
Viewing your files
1. Switch on the camera and press the “Playback mode” key.
2. Use the “Up” and “Down” keys to browse through your photos and your videos
(the
icon is displayed on the upper-left corner of the screen).
3. Press the Shutter key to start or stop a video.
4. Press the “Playback mode” key at any time to go back to camera mode.
Note: “No Photo” appears when there are no stored photos or videos.
Deleting files
1. In playback mode, use the “Up” and “Down” keys to display the desired photo or
video, then press the “Power/Mode” key.
2. Press the “Up” and “Down” keys to select “YES” and press the Shutter key to
confirm and delete the photo or the video.
3. Press the “Power/Mode” key to go back to camera mode.