Lexibook TSR50 - Manual (Page 3)

3
ENGLISH
Copyright © Lexibook 2006
Introduction
Congratulations! You have just purchased a Lexibook® Universal 8 in 1 Remote
Control. Compatible with over 8000 audio-visual devices, this universal remote
control combines the functions of several remotes: TV1, TV2, DVD, CD, Video
Recorder (VCR), Satellite (SAT), CABLE TV (CBL), and Auxiliary (AUX). Digital
TV receivers (like ADSL modems, Freeview etc…) can be also controlled by the
SAT key.
Caution: Before its first use, you must set up the remote control so that it
functions with your chosen audio-visual products. To do so, please read these
instructions carefully.
Static label: Before using this unit, please remove the clear film label from the
LCD screen by pulling the tab.
Installing batteries
Before programming and using your remote control, install 2 x AAA/LR03
alkaline batteries (not included). To do so, open the battery compartment located
at the back of the remote. Make sure to install the batteries according to the
polarity (+/- signs) indicated inside the battery compartment. Close back the
battery compartment.
Notes:
Your remote control will not lose its settings when the batteries are out of power.
When changing the batteries, do not press any key on the remote control. Else,
the remote control’s settings will be affected.
The red (R), green
(G), yellow(Y), and
blue (B) buttons can
have various functions
depending on whether
your TV set supports
these applications.
TV2 - TV2 selection and set
key (second TV set). DVD – DVD player
selection and set key.
VCR – VCR selection and
set key.
TV1 – TV selection and
set key.
AUX – Hi-Fi system
selection and set key.
CD – CD player selection
and set key.
SAT – Satellite TV
receiver selection and
set key.
CBL – Cable TV selection
and set key. M1/M2/M3 – Macro keys.
SET – to trigger
setting mode.
LIGHT – to enable the
backlight.
Using the buttons and functions
Once you complete the setup procedure, the Lexibook® Universal 8 in 1
Remote Control will allow you to control the various audio-video devices you
have at home. When you use the remote, first select the type of device you wish
to use by pressing the corresponding device key (TV1, TV2, DVD, CD, VCR,
SAT, CBL or AUX). Aside from the 8 device keys and the macro keys, all other
keys on the remote control are only operative if your device also has these
functions. For example, the pause key ( ), will work in DVD/CD mode but not in
TV1/TV2 mode.
������
���� ���
����
TSR50IM0116.indd 3 31/03/2006 09:21:38