Lexibook JC18GB User Manual

Power premier, Instruction manual jc18gb, A child’s fi rst educational computer

Advertising
background image

105(W)x150(H)mm

INSTRUCTION MANUAL

JC18GB

1

POWER PREMIER

®

A child’s fi rst educational computer!

®

®

INTRODUCTION

Your Power Premier is the ideal educational computer to discover school subjects.
Along with your kangaroo game companion, you will learn the alphabet, new words,
numbers, basic mathematics, some French and music. There are also five thrilling
games included! The greatest challenge of this computer is the mission mode where
your grasp and knowledge of all the activities will be tested. Please read the instructions
below to learn how to use your new computer and play the various activities.

POWER SUPPLY

Your Power Premier works with 3 alkaline 1.5V batteries type AA (included).
This game must be powered using only the specified batteries.

1. Open the battery compartment cover located under
the computer.
2. Install the 3 AA batteries observing carefully the
polarity indicated at the bottom of the battery
compartment, and as per the diagram shown opposite.
3. Close back the battery compartment.

Do not use rechargeable batteries. Do not recharge the batteries. Remove the storage
batteries before recharging. Recharge storage batteries under adult supervision. Do not
mix different types of battery and storage battery, or new and old batteries or storage
batteries. Insert batteries and storage batteries according to the polarity. Remove used
storage batteries from game. Do not short-circuit the battery or storage battery terminals.
Keep batteries away from fire. If game remains unused for an extended period, remove
batteries. Only batteries of the same or equivalent type as recommended are to be used.
When the sound becomes faint or the game does not respond, think about replacing the
batteries.

WARNING: If the unit malfunctions or receives an electrostatic shock, switch the unit off
and on again using the ON/OFF button. If this proves to be ineffective, remove the
batteries and/or perform the Reset procedure.

Advertising