Gardner Bender BB3040 PVC Bender Blankets User Manual

Instruction sheet, Gardner bender

Advertising
background image

Do no use bender blankets on wet
surfaces or if blankets are wet.

Always wear protective gloves (thermal
insulated) when handling bender

blankets and heated PVC pipe. Bender Blankets operate
at temperatures of 250

o

to 300

o

.

Note: Wait for blankets to cool. Store the blankets
carefully to avoid damage when not in use.

Important: Read the caution and identification labels
attached to each blanket.

Do not bend, fold or crush the bender
blankets. Each blanket tends to have a

natural curl which allows for rolling and storage.

PVC Bender Blankets are rated for PVC
conduit through schedule 40. Do not

attempt to use on other materials. Inner blanket
temperatures may exceed 300

o

F.

Cooling PVC pipe should be done while
wearing gloves and using cool, wet rags.

Do not touch the pipe with your bare skin.

Important: The entire length of the bender blanket must
be in contact with the pipe. Do not use for heating on
bent areas of pipe.

IMPORTANT: RECEIVING INSTRUCTIONS: Visually inspect all components for shipping damage. If any shipping
damage is found, notify carrier at once. Shipping damage is NOT covered by warranty. The carrier is responsible for
all repair or replacement costs resulting from damage in shipment.

Gardner

Bender

Instruction

Sheet

IMPORTANT USER SAFETY AND PROTECTION: In setting up systems to fit your operations, care must be taken to
select the proper components and design to insure appropriate integration with your operations and existing
equipment and that all safety measures have been taken to avoid the risk of personal injury and property damage
from your application or system.

GB GARDNER BENDER CANNOT BE HELD RESPONSIBLE FOR DAMAGE OR INJURY CAUSED BY UNSAFE
USE, MAINTENANCE OR APPLICATION OF ITS PRODUCTS.
Please contact GB's technical service department
for assistance if you are in doubt as to the proper safety precautions essential to designing and setting up your
particular application.

PVC Bender

Blankets

BB5150, BB2030

BB3040

!

WARNING

!

WARNING

Advertising
This manual is related to the following products: