Gardner Bender CP8006 Powered Cable Puller - Manual

1
Gardner
Bender
Powered Cable Pullers
CP800, CP8000, CP8000D
CP8003, CP8006
Instruction
Sheet
IMPORTANT: RECEIVING INSTRUCTIONS
Visually inspect all components for shipping damage.
If any shipping damage is found, notify carrier at once.
Shipping damage is NOT covered by warranty. The
carrier is responsible for all repair or replacement
costs resulting from damage in shipment.
Do not use broken or damaged cable puller component parts.
Damaged parts can cause structural weakness resulting in failures
at loads below rated capacity.
CATALOG
NUMBER DESCRIPTION
CP8006 Brutus™ Power Puller – with 600’ rope; for
exposed or concealed conduit (Wt: 495 lbs.).
Includes metal case with casters (Cat. #CM16).
CATALOG
NUMBER DESCRIPTION
CP8003 Brutus™ Power Puller – with 300’ rope; for
exposed or concealed conduit (Wt: 440 lbs.).
Includes metal case with casters (Cat. #CM16).
CATALOG
NUMBER DESCRIPTION
CP8000 Brutus™ Power Puller – for exposed or
concealed conduit (Wt: 235 lbs.).
Includes metal case with casters (Cat. #CM16).
CATALOG
NUMBER DESCRIPTION
CP8000D Brutus™ Power Puller – for exposed conduit
(Wt: 355 lbs.). Includes metal case with casters
(Cat. #CM16).