CNB SKB-21Z12F - Manual (Page 11)

• Function : By using Swing function, you can make camera to move between 2 Preset
positions repeatedly. When swing function runs, camera moves from the preset
i d th 1 t i t t th t i d th 2 d i t Th
• Function : The group function allows running sequence of Presets, Pattern and/or Swings.
Max 8 group can be stored. Each group can have max 20 action entities which can be preset,
tt i P t d b t d th t b f P tt & S i
SWING GROUP
assigned as the 1st point to the preset assigned as the 2nd point. Then camera moves
from the preset assigned as the 2nd point to the preset assigned as the 1st point. Speed
can be set up from 1 °/sec to 180°/sec. You can not set the same preset.
• Set : To set Swing, use OSD menu.
• Run : Method 1) Run Pattern [Swing NO.+10] ex) Run Swing 3 : Run Pattern [13]
Method 2) Go Preset [Swing NO.+140] ex) Run Swing 3 : Go Preset [143]
pattern or swing. Preset speed can be set up and the repeat number of Pattern & Swing can
be set up in Group setup. Dwell time between actions can be set up also.
Preset 1 Pattern 1 Swing 1
DWELL TIME
• Delete : To delete Swing, use OSD menu.
• Function : Pattern Function is that a camera memorizes the path (mostly curve path)
• Set : Use OSD menu to create a Group.
• Run : Method 1) Run Pattern [Group NO.+20]
ex) Run Group 7 : Run Pattern [27]
PATTERN
Max. 20 Action
by joystick of controller for assigned time and revives the path exactly as it memorized.
4 Patterns are available and Maximum 1200 communication commands can be stored in
a pattern.
• Setting : Pattern can be created by one of following two methods.
Method 1) Set Pattern [Pattern NO.]
- Pattern editing screen is displayed as bellow.
Method 2) Go Preset [Group NO.+150] ex) Run Group 7 : Go Preset [157]
• Delete : To delete Group, use OSD menu.
EDIT PATTERN 1
■■■■■■ ■■■■■■ ■■■■■■■ g p y
- Movement by Joystick and preset movement can be
memorized in a pattern.
- The rest memory size is displayed in progress bar.
- To save the recording, press NEAR key and to cancel,
press FAR key. [NEAR:SAVE /FAR:DELETE ]
■■■■■■ ■■■■■■ ■■■■■■■
0/0/x1/N
┏ ┓
┗ ┛
Method 2) OSD using OSD menu: See the section “How to use OSD menu”.
• Run : Method 1) Run Pattern [Pattern NO.] ex) Run Pattern 2 : Run Pattern [2]
Method 2) Go Preset [Preset NO.+130] ex) Run Pattern 2 : Go Preset [132]
• Delete : To delete Pattern, use OSD menu.
20 21