Conveyor Technologies DS-.6M-1 - Manual

STACKER PCB
PN: DS-.6M
STANDARD FEATURES:
• Auto/Pass-Thru Switch.
• Mechanical walls apply pressure
against the stack of PCB’s while releas-
ing the bottom PCB to the conveyor
below.
• Protective covers for safety and easy
access
• PLC Controls with SMEMA cables.
• Hand Crank width adjust = 2.” - 16.0”
• Board Edge Clearance = .100” (.060”
min)
• 1⁄2 Inch Steel Welded Frame
OPTIONS:
• Light tower for indicating operating
status
• 18.0” x 20.0” PCB Capability
• CE Compliance
STANDARD SPECIFICATIONS:
PCB Size Min: 2.0” x 5.0”
Max: 14.0” x 16.0”
(Odd shaped PCB’s will not work in this machine)
PCB Height 37.5” + 2”
PCB Clearance Top: = .800”
Bottom: = .500”
Air Consumption .5 cfm @ 65 PSI
Power Supply 110 VAC, 5A
Cycle Time 4 - 6 seconds
Capacity 8 Inch Stack