LEADER LT443D - Manual (Page 2)

LT 443D-GLA GENLOCK UNIT
2
This unit provides genlock capability to lock the LT 443D mainframe with
the external reference signal, and three independent black signal genera-
tors.
The NTSC/PAL black burst signals, principal 20 types of HDTV analog tri-
level sync signal formats, and 525p/625p analog sync signals can be used
as an external reference signal.
The following black burst signal formats can be selected.
For NTSC/PAL system, black burst signal with field reference pulse is pro-
vided. For NTSC system, black burst with 10-field sequence identification
conforming to the SMPTE 318M standards is provided.
The instrument continues operation since the flywheel mode is provided
even if the external reference signal is accidentally removed in genlock
mode. By logging the genlock status, the time can be obtained when the
external reference signal is removed. The log information can be stored on the CF CARD.
The genlock timing can be adjusted for the entire color frame range when
the NTSC/PAL black burst signal is applied; entire frame range when the
HDTV analog tri-level sync signal is applied.
Three black burst signal output systems with selectable formats are avail-
able as follows:
For NTSC/PAL system, standard black burst signal and black burst signal
with field reference pulse are provided. For NTSC system, 10-field black
burst signal with ID conforming to the SMPTE 318M standards, 525p/625p
analog sync signal, and HDTV analog tri-level sync signal are provided.
The format and output signal timing of each output can be respectively set.
The black signal timing can be adjusted for the entire color frame range
when the NTSC/PAL black burst signal is applied; entire frame range when
the HDTV analog tri-level sync signal is applied.
The LT 443D-HD HD-SDI Unit adds the 14 format HD-
SDI signal output capability to the LT 443D mainframe.
Various functions (e.g., ID character, simple motion
pictures, embedded audio, NATURAL picture pattern*)
are provided.
*The NATURAL picture function is only usable when
the LT 443D-70 Option is installed in the mainframe.
Output
• HD-SDI Video Output
Specifications
• Specifications
SDI Characteristics
• Bit Rate
• Output Amplitude
• Overshoot
• Rise and Fall Time
• Return Loss
Function
• Applicable Format
• Test Patterns
1 system, 2 outputs (75 Ω , BNC)
Conforms to SMPTE 240M(Except for Return Loss)
/274M/296M standards
1.485 Gbps, 1.485/1.001 Gbps
800 mVp-p ±10%
≤ 10 %
≤ 270 ps (20 % to 80 %)
≥
15 dB (5 MHz to 742.5 MHz)
≥ 10 dB (742.5 MHz to 1.485 GHz)
1035i/60, 1035i/59.94,
1080i/60, 1080i/59.94, 1080i/50,
1080p/30, 1080p/29.97, 1080p/25,
1080p/24, 1080p/23.98,
1080PsF/24, 1080PsF/23.98,
720p/60, 720p/59.94
The following formats will be supported:
720p/29.97, 720p/24, 720p/23.98, 720p/50,
720p/30, 720p/25
COLOR BAR 100 %, COLOR BAR 75 %, MULTIFOR-
MAT COLOR BAR (ARIB STD-B28) FLAT FIELD 100 %,
• Variable Timing
Variable Range
Variable In V
H
• Simple Motion Picture Mode (Scroll)
Direction
Speed (Range, Resolution)
Field Frame Interlace
V Interlace
H Common
• ID Character
• Embedded Audio
Number of Channels Embedded
Sampling Frequency
Resolution
Preemphasis
Frame Number
Frequency
Level
FLAT FIELD 50 %, FLAT FIELD 0 %, LINE SWEEP 100
%, MULTI BURST 100 %, BOWTIE 100 %, RAMP, SHAL-
LOW RAMP, 10 STEP, PULSE & BAR, CHECK FIELD,
RED RASTER 100 %, CROSS & DOT, MONOSCOPE
Entire frame range
Line steps
Clock steps (74.25 MHz or 74.25/1.001 MHz)
8 directions (vertical, horizontal, diagonal)
Variable in field steps
0 to 256 lines in 2 line steps
0 to 256 dots in 4 dot steps
ID characters can be displayed at the arbitrary posi-
tion on the screen.
8 channels (4 channels x 2 groups)
Each group can be set ON/OFF
48 kHz (sync to video signal)
20 bits, 24 bits, selectable
OFF, 50/15 µs, CCITT, selectable (CS bit is only selected.)
None
50, 100, 150, 200, 250, 300, 400, 500, 600, 750,
800, 1.0 k, 1.2 k, 1.5 k, 1.6 k, 2.0 k, 2.4 k, 3.0 k,
3.2 k, 4.0 k, 4.8 k, 5.0 k, 6.0 k, 8.0 k, 9.6 k, 10 k,
12 k, 15 k, 16 k, 20 kHz, silence
-60 to 0 dBFS (settable in 1 dB steps)
*Frequency, level, and audio click can be set to
each channel.
*When the CHECK FIELD pattern is selected, no
audio signal is embedded.
Sync Level (into 75 Ω )
• HDTV
• 525p
• 625p
• NTSC
• PAL
Rise and fall times
• HDTV
• 525p
• 625p
• NTSC
• PAL
Horizontal Sync Width
• 1125-Line Format
• 750-Line Format
• 525p
• 625p
• NTSC/PAL
Vertical Sync Width
Output Connector
Number of Outputs
Timing Variable Range
• H-PHASE
• V-PHASE
• F-PHASE
N14/SMPTE RP-154/SMPTE 170M/SMPTE 318M
standards
PAL black burst signal conforming to ITU-R BT. 470-
6 standards
Positive polarity: 300 mV ±6 mV
Negative polarity: -300 mV ±6 mV
-300 mV ±6 mV
-300 mV ±6 mV
40 IRE ±1 IRE
-300 mV ±6 mV
54 ns ±20 ns
70 ns ±10 ns
100 ns ±10 ns
140 ns ±10 ns
200 ns ±10 ns
Positive polarity: 593 ns ±40 ns
Negative polarity: 593 ns ±40 ns
Positive polarity: 539 ns ±40 ns
Negative polarity: 539 ns ±40 ns
2.35 µs ±0.05 µs
2.35 µs ±0.1 µs
4.7 µs ±0.1 µs
5H (HDTV) / 6H (525p) / 5H (625p) / 3H (NTSC) / 2.5H (PAL)
BNC
1 each
Up to ±1 line-1 dot
Up to ±1 frame-1 line
Up to ±5 frames (depends on the input signal format.)
Genlock Function
Loop-Through Input
Input Configuration
Return Loss
Reference Input Signal
Reference Input Signal Level
• HDTV
• 525p/625p
• NTSC
• PAL
Operation Modes
Genlock Timing Variable Range
• H-PHASE (FINE)
• H-PHASE (COARSE)
• V-PHASE
• F-PHASE
Analog Sync Signal Output
BLACK 1/BLACK 2/BLACK 3 Output
Format
BNC connector, 75 Ω loop-through
≥ 30 dB (0.3 MHz to 30 MHz)
HDTV tri-level sync signal conforming to SMPTE
240M/274M/296M standards
525p/625p analog sync signal conforming to SMPTE
293M/ITU-R BT 1358 standards
NTSC black burst signal conforming to EBU
N14/SMPTE RP-154/SMPTE 170M/SMPTE 318M standards
PAL black burst signal conforming to ITU-R BT. 470-6 standards
Positive polarity: 300 mV
Negative polarity: -300 mV
-300 mV
-286 mV
-300 mV
AUTO and MANUAL modes are provided for select-
ing INT or EXT mode.
Fine adjustment between the H-PHASE (COARSE) steps.
±1/2 line with respect to the input signal
±1 frame with respect to the input signal
Up to ±5 frames with respect to the input signal.
(Variable range depends on the input signal format.)
HDTV tri-level sync signal conforming to SMPTE
240M/274M/296M standards
525p/625p analog sync signal conforming to SMPTE
293M/ITU-R BT 1358 standards
NTSC black burst signal conforming to EBU
Plug-In Unit For LT 443D
LT 443D-HD HD-SDI UNIT/LT 443D-HDB (HD-SDI Out x 2, HD-SDI Black Out x 2) UNIT Plug-In Unit For LT 443D
Leader Instruments Corporation
6484 Commerce Drive
Cypress, CA 90630
www.LeaderUSA.com
[email protected]
Tel. : 1 (714) 527-9300
Fax.: 1 (714) 527-7490