Lectrosonics LE Series - Manual (Page 12)

SPECIFICATIONS
Input:
Type Balanced and RF filtered
Impedance 20K balanced or unbalanced
Max input level +20dBu
Output:
Type Balanced, floating, and RF filtered
Impedance 100 Ohms balanced, 50 Ohms unbalanced
Max output level +20dBu
THD @ +4dBu, 20-20kHz <0.05%
IMD @ +4dBu, 60/7kHz mixed 4:1 <0.05%
Noise (20-20kHz) -90dBu
(Tone controls flat)
Equalization:
Bass Shelving type, 10dB cut/boost range
See Figure 2 on page 3 for response curves.
MidBass Bandpass type, 10dB cut/boost range
See Figure 2 on page 3 for response curves.
MidTreble Bandpass type, 10dB cut/boost range
See Figure 2 on page 3 for response curves.
Treble Shelving type, 10dB cut/boost range
See Figure 2 on page 3 for response curves.
Notch Filters: Fixed 12dB, 1/7 octave bandwidth @ -3dB points
Variable center frequency from 50-5kHz
11