Lectrosonics Long Ranger III - Manual (Page 13)

Portable Wireless Sound System
ACCESSORIES AND REPLACEMENT PARTS
ITEM
CH-40
HM142V
HM152V
M121S
MC-16C
MC-44
MM-16
MM-36
RK-51
RK-119
RK-142
14040
21329
CCPRO
SS-5
DESCRIPTION
Battery Charger
Single headband
Double Headband
Dynamic Microphone
Microphone Cord
Microphone Cord
Microphone Cord
Patch Cord
Wind Screen
Wind Screen
Wind Screen
Shoulder Strap
Power Adapter Cord
Carying Case
Tripod Stand
USE
Replacement
With locking micro plug for M175
Headset Microphone series transmitters.
Double adjustable headband. With micro plug
Headset Microphone for M175 series transmitters.
For hand-held use plugged into the auxiliary MIC input of the LONG
RANGER III (cord not supplied).
16 ft. coil cord (1/4" male to male) for M121S
1/4" male to locking micro male; adapts M121S to M175
Straight cord (1/4" male to male) for M121S
36" RCA (male to male) For interconnecting AUX IN/OUT jacks.
For M121S microphone
For M119 and M140 microphones
HM142V and HM152V headset microphones
For carrying LONG RANGER III
For connecting LONG RANGER III to vehicle cigarette lighter adapter.
Molded, pre-cut foam lined
2-section legs, riser column; 60" max. height
SPECIFICATIONS
Operating frequency: 169 to 186 MHz
Audio power output: 33 Watts, RMS, into 8 Ohms
Distortion: less than 1%
Amplifier freq. response: 50Hz to 20kHz; +0, -3 dB
Max. audio output(SPL): 140 dB at 3 feet
FM deviation: ±15kHz
Wireless operating range: Up to 750 feet
RF signal-to-noise ratio: 96dB, A weighted
Speaker: 6" x 12" re-entrant horn
Weight: 16 lbs.
Dimensions: 15" high, 6 3/4" wide, 9 1/4" deep
Specifications subject to change without notice.
Rio Rancho, NM – USA 13