Installation & setup, 1 - install lc flowmeters, 2 - install lcr 600 and dms (& lcr-ii) units – Liquid Controls FlightConnect Setup Guide User Manual

Page 6: 3 - setup lcr 600 & dms (& lcr-ii) units, 5 - populate flightconnect database

Advertising
background image

6

InstallatIon & setup

#1 - Install lc flowmeters

Before installing electronics, Liquid Controls positive displacement flowmeters must be properly installed into the

piping system of the refuellers, hydrant trucks, hydrant carts, or other fueling vehicles. Typically, this step is completed

by the OEM that built the fueling vehicle.

applicable manuals:

M100-10 (M-MA Flowmeters) 48683
M100-20 (MS Flowmeters) 500318

#2 - Install lcr 600 and dms (& lcr-II) units

After the flowmeters are installed, the electronics can be mounted and wired onto the fueling vehicle. LCR 600s are

typically mounted directly onto the meter; however, they can also be mounted remotely and wired to a POD pulse

device mounted onto the flowmeter. DMSs must be installed with an accompanying LCR-II. LCR-IIs can also be

mounted directly onto the flowmeter or remotely and wired to a POD.

applicable manuals (lcr 600):

EM150-10 (LCR 600 Install) 500355
Optional:
EM300-10 (POD) 500003A

applicable manuals (dms):

EM150-20 (LCR-II Install) 502060
EM200-10 (DMS Install) 500343
Optional:
EM300-10 (POD) 500003A

#3 - setup lcr 600 & dms (& lcr-II) units

Next, the LCR 600 and DMS (and LCR-II) units can be set up for FlightConnect aviation fueling.
This step might include Weights and Measures calibration, which must be completed by a certified technician.

applicable manuals (lcr 600):

EM250-10 (LCR 600 FlightConnect) 500390

applicable manuals (dms):

EM100-11 (LCR-II Setup) 500302
EM200-11 (DMS Setup) 500342
EM200-16 (DMS FlightConnect) 500323

#4 - Install FlightConnect Office & DBManager Software

After the electronics are installed, the Flight Connect Office and DBManager software for the office computer can be

installed. Typically, software is installed from a CD-ROM supplied by Liquid Controls.

applicable manuals:

EM200-17 (FlightConnect Office) 500324
EM200-21 (DBManager) 500387

#5 - populate flightconnect database

After the office software is installed, the FlightConnect master database can be populated with operational details and

preferred FlightConnect settings.

applicable manuals:

EM200-17 (FlightConnect Office) 500324

Advertising