Luminex xPONENT for MAGPIX 4.2 - Manual (Page 117)

This tab contains routines to initialize, verify, and maintain the analyzer.
Automated Maintenance Options - Provides buttons for commonly used maintenance
routines for the machine. Select from the following:
• System Initialization - Select this routine to perform System Initialization.
• Performance Verification - Select this routine to use with the Performance Verification
kit.
• Calibration/Verification - Select this routine to use with the Calibration/Verification kit.
• System Shutdown - Select this routine to perform a pre-defined system shutdown.
The commands for these routines display in the command list below the buttons.
• Command - This list is used to view the name of the current command, its well location, its
status, and information about the command. Only the current commands are listed in the
box.
• Reagents - Displays the reagents and well locations necessary for the selected routine.
You can select kits for the routines from the Calibration Kit and Performance
Verification Kit lists.
• Report - Opens the Reports tab, with the Performance Verification Reports selection
displayed in the Report: list.
• Import Kit - Opens the Import Calibration or Performance Kit dialog box. Select a kit
and click Open to import a kit.
• Run - Initiates the selected routine.
xPONENT for MAGPIX 4.2 Software User Manual
104