Addlogix InternetVue 2100 - Manual (Page 20)

Addlogix Wireless PC2TV InternetVue 2100 Version 0.2
20
Wireless Settings
Figure 17: Internet Connection – Wireless Settings Screen

The Wireless Network settings allow you to select one of the three possible connection
configurations for your PC2TV device.
1. The “Do not allow external network connections” setting means there is no connection from
the PC2TV device (either wireless or Ethernet cable) to the Internet.
2. The “Connect to external networks using wired Ethernet“ setting means you have an Ethernet
cable connected to your PC2TV device.
3. The “Connect to external networks using wireless“ setting means you will use the wireless
access point (that you select from the list) to connect to the Internet.

Wireless access points shown with a “lock” icon require an Encryption Key. When you
select a “locked” item, the Wizard prompts you to enter the Encryption Key required by this
wireless access point.

The “Enable Display Encryption“ setting (not used with the “Connect to external networks
using wireless“ setting) allows encrypting the wireless link from your PC to the PC2TV
device.