Alliance Laundry Systems Drying Tumbler - Manual (Page 22)

70400101 20 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Before You Call for Service
Customer Service
If literature or replacement parts are required, contact
the source from which the machine was purchased or
contact Alliance Laundry Systems at (920) 748-3950
for the name and address of the nearest authorized
parts distributor.
For technical assistance, call (920) 748-3121.
Won’t
Start
Won’t
Heat
Clothes
Not Dry
Possible Reason – Corrective Actions
• Insert correct coin(s) or valid card if applicable.
• Close the loading door tightly.
• Close lint panel tightly.
• Press the START pad/button.
• Be sure power is supplied to the machine.
• Check the main fuse and circuit breaker.
• Check fuses located in the machine.
• Insufficient airflow.
• Gas shut-off valve in OFF position.
• Are controls properly set?
• • Tumbler is in Cool Down Mode.
• • Lint screen clogged. Clean lint screen.
• • Exhaust duct to outside is blocked. Clean out.