IntelliTrack WMS – Warehouse Management System - Manual (Page 176)

I NTELLI T RACK WMS: W AREHOUSE M ANAGEMENT S YSTEM V 8.1
User Manual
150
the Serial # field beneath the Location field display the relevant infor-
mation for this item.
6. If multiple sites are selected, in the Move To section of the form, click
the drop-down arrow in the Site field and select the site to which you
are moving the item from the drop-down menu list that appears.
7. In the Move To section of the form, click the drop-down arrow in the
Location field and select the location to which you are moving the item
from the drop-down menu list that appears.
8. Next, click in the Qty to Move field, and enter the quantity of the item
that you are moving:
• As a reference, the number of available items in the location is listed
below the Qty to Move field, next to the Select All button. If you
want to move all of the items to the selected location, click the
Select All button. The total item quantity listed next to the Select All
button will be entered in the Qty to Move field.
• If you want to move a specific quantity, not all of the items, enter the
quantity of the item that you are moving in this field.
9. Click the Do It button found along the bottom of the form to process
the move. (Clicking the Cancel button found along the bottom of the
form will cancel the move entries.)
10. Select the Close button found along the bottom of the form to exit the
form.
Mass Move
If you are moving all the items in one location to a new location, you are
able to record the entire inventory movement at once with the Mass Move
form.
Recording a
Mass Move To reach the Mass Move form, select Manage > Inventory > Mass Move
Selection from the ribbon.