JuiceGoose iP 1520 - Manual (Page 6)

DETAILED INSTALLATION AND SETUP
Unbox the unit. The box contains: the iP1520 unit, the iP1520 manual and a
warranty card .
Mount the iP1520 in a 19” wide rack with metal mounting rails, designed with
1.75” spacing. Use appropriate rack mounting hardware. Always power the
IP1520 on a grounded outlet. Do not defeat the grounding feature of the
iP1520 power cord.
SET UP DETAIL
Connecting to the iP1520 using a Router.
1. Connect the iP1520 to your network router using a Cat 5 cable plugged into
the RJ45 “Network” port on the rear of the unit and the other end to your net-
work router.
2. Plug the iP1520 power cord into a live AC receptacle, such as a wall outlet,
with a twenty amp capacity (i.e. NEMA 5-20R).
3. The iP1520 will take a few seconds to boot up and configure itself at which
point the Network light on the front of the unit should illuminate and remain on
without blinking, indicating network connectivity. If the Network light blinks
check the cable connections.
4. Open a web browser on your PC and type in the following address on the
navigation bar to access the iP1520: http://juicegoose
Be sure to type exactly as shown. No domain such as .com should be added:
5. You will be presented with the login box. Enter the following initial username
and password (these can be changed later):
User: admin
Password: juicegoose
Connecting to the iP1520 using a Crossover CAT5/6 cable.
(recommended for advanced users only)
To connect the iP150 to a PC directly you will need to change the properties of
your internet connection/IP address.
1. Plug the CROSSOVER cable into the PC network socket and the other end
into the iP1520 Network socket .
2. Plug the iP1520 power cord into a live AC receptacle, such as a wall outlet,
with a twenty amp capacity (i.e. NEMA 5-20R).
3. The iP1520 will take a few seconds to boot up and configure itself at which
Page 5