LevelOne KVM-0811 - Manual (Page 21)

18
D. The “ CONSOLE ON/OFF “ means to manage the console of KVM switch. If you select
“ CONSOLE ON “, it means that any user can use the console. If you select “ CONSOLE
OFF “(factory default OFF state), it means that any user will not be allowed to use the
console unless you enter the password. When you enter the password already and pass
the KVM switch authentication, the CONSOLE will be set to ON. After you finish using
KVM switch, please don’t forget to set up CONSOLE ON state to OFF state. Besides, if
current CONSOLE is ON state and you reset KVM switch, the CONSOLE will be set up
ON state back to OFF state.
E. When you finish the set up of PC name and get out of OSD setting mode, you will find
the PC name showed at the up-left corner of monitor. Now, you can use ESC key to
clear the message right away if you don’t need it.
F. If you want OSD returning back to factory default value, you can execute “SCROLL
LOCK”, “SCROLL LOCK” , “R” keys in order. The bank seven segment LED on the front
panel will be flashed during the refresh process.
When the OSD value back to default setting, the bank seven segment LED on the front
panel will stop flashing
NEW PASSWORD COMPLETE
ESC : QUIT ENTER : COMPLETE
102 19. ☼SYSTE
M 02
ROM REFLASH