LevelOne GNS-1001 - Manual (Page 5)

~ 1 ~
1 Installation Hard Disk
(Fig. 1)
(Fig. 2)
(Fig. 3)
(Fig. 4)
(Fig. 5)
(Fig. 6)
1. Remove the Hard Disk holder from the casing, loose 2 screws on the back & bottom. (Fig.
1)
2. Take out the inside Hard Disk Holder. (Fig. 2)
3. Insert the Hard Disk to the Hard Disk Holder. (Fig. 3)
4. Fasten the HDD to the holder from 2 sides with 2 screws each side. (Fig. 4)
5. Install the Hard Disk holder back to the casing. (Fig. 5)
6. Fasten the Hard Disk holder to the casing with 2 screws on the back & bottom. (Fig. 6)