LevelOne VOI-8001 - Manual (Page 78)

78
4.2.6.3 Call Timer
/VoIP Setup/Application/Call Timer
The gateway can enable to set the limit communication time to Line port by Area
Code rule issue on this page.
a.
 Pre Alarm: Set the Call time limit before the arrival, to issued the
warning sound of few seconds down, default is disable, you can
choose for four options(Disable, 10Sec, 20Sec, 30Sec).
 Line: Set enable or disable for the Line port .
b.
 Remark: Remark for this routing rule. Please use UNDERLINE to
replace the SPACE due to HTTP protocol limitation.
 Area Code: Define the Prefix number to fit this rule, any phone
number prefix digits matched with the rule will limit the time by this
rule define.
 Minute: define the time limit value for the rule.
 Enable: checked to enable the rule or unchecked to disable the rule.
To add on the rule table will be effect routing table for both of /VoIP
Setup/Routing Setup/VoIP Call in or /VoIP Setup/Routing Setup/VoIP Call out ,
whether direction to IP calling or to PSTN calling are applicable to this item
feature set.
Please remember to press the modify button to take it effect. For store back to
flash memory, please press /Syetem Maintenance/Save Modification/ .