13 install optional keyboard, Figure 4-14: internal ps/2 connector – IEI Integration EC-1040G User Manual
Page 50
Advertising
EC-1040GB Workstation
Page 40
4.5.13 Install Optional Keyboard
To install the optional keyboard, please follow the steps below.
Step 1:
Remove the cover from the keyboard bay.
Step 2:
Insert the keyboard slide rails into the keyboard bay while carefully routing the
PS/2 connector along the bottom panel of the workstation to the internal PS/2
keyboard connector until the entire keyboard assembly locks into place.
Step 3:
Connect the keyboard PS/2 connector to the internal PS/2 connector
(Figure 4-14).
Figure 4-14: Internal PS/2 Connector
Advertising