Qualcraft UltraPro Aluminum Mobile Scaffold - Manual (Page 2)

operational safety
metal conducts electricity:
Do not use this equipment where contact may be made with power lines or other live electrical circuits.
do not overload:
This scaffolding is designed to support a maximum load of 700 lb (318 kg)
failure to understand and folloW all safety rules and assembly instructions could result
in serious inJury or deatH.
read before beginning assembly.
operation and safety
All photos and drawings in this booklet are for reference purposes only. Refer to applicable OSHA codes and regulations for the proper use of this equipment.
Do not use this equipment if you are in poor health, taking medications, drugs, or have been consuming alcohol,
all of which may impair your ability to work safely on this product.
Always use this scaffold in conformity with local or national legislation which applies.
Inspect before use. Do not use scaffold if damaged or parts are missing.
Examine thoroughly to make sure unit is properly set up.
Always use casters locked to the side frames with the locking pins.
Securely lock all braces and deck before each use.
The deck must be fully seated within the braces and locked with the security latches before each use.
Braces must be inspected to ensure locking mechanisms are working correctly. Any brace with damaged locking
devices should not be used.
Never stack more than two units.
There must be a minimum of two side braces installed on each scaffold level and evenly spaced throughout the scaffold.
Lack of adequate bracing could cause scaffold to collapse.
Always use outriggers and guardrails when stacking units.
Guardrails must be installed on all open sides of a work deck where a person could fall from a height
of 6 ft (1.8 m) or more.
Do not climb unless all casters are in locked position.
Always remove casters when using this scaffolding on stairs.
Erect to be plumb on firm and level surface.
This scaffold must be used on a firm surface that is free of pits, debris, holes or obstructions.
Never place anything under or attach anything to this scaffold to increase height or to adjust to uneven surfaces.
Acids are corrosive and can seriously affect strength. Do not expose this scaffold to corrosive substances.
Keep scaffold free of debris and unnecessary equipment.
Keep your body close to the scaffold as you climb.
Do not overreach. Always keep body centered inside structure of scaffold.
Remove or fasten all tools, material or equipment before moving. Use extra caution when moving to avoid tipping.
Never try moving this scaffold while standing on it.
Never move a scaffold with a worker within.
Do not use powered devices to propel this scaffold. Use extra caution near operating machinery.
Do not use if the surface is not firm and level.
Do not use in inclement weather or high winds.
Maintain a firm grip while climbing.
Do not modify the scaffold or any of its components.
Do not use the scaffold as a footbridge.
assembly instructions
1 Insert casters in side frame’s lower extremity. Lock casters with locking pins.
2 Lock the casters by firmly depressing the top tab of the caster.
3 While maintaining the brace locking mechanism pulled, insert the braces onto the frame sides at desired height.
4 Ensure that the locking stems are properly engaged in side frames.
5 Secure each brace using the 2 locking-pins.
6 Install the platform on the braces.
7 Turn the platform security latches toward the inside.
1
3
6
4
7
2
5
box contents
QTY. DescriPTion
2 Side frames
2 Braces
1 Anti-slip platform
4 Casters
8 Locking-pins