American Dynamics Tyco 8 - Manual (Page 34)

Installing IP SDU8 with a ROENDC End Cap
5-6 Installation Guide
Figure 5-12 Inserting the desiccant bag into the housing
Caution
If the bubble is attached for up to 30 minutes or more and then detached, the bag must be replaced
before the bubble is attached again. An extra bag is supplied. If more are needed, order kit 0352-0207-
02.
21 Connect the housing and eyeball assembly to the base by aligning the Cap and Base tabs.
Figure 5-13 Aligning the Cap and Base tabs
22 Turn the eyeball assembly clockwise until you hear a click.
Figure 5-14 Locking the eyeball assembly
23 Apply power to dome.
Base tab
Cap Tab