Watlow Series F4S/D - Manual (Page 56)

5 . 8 ■ S e t u p Wa t l o w S e r i e s F 4 S / D
Setup Page Parameter Table
Modbus
Register
Range read/write Conditions for
Parameter Description (Modbus Value) Default (I/O, Set, Ch) Parameters to Appear
Active: Always.
ç
CAUTION: Changes to
Sensor, Type, Units,
Decimals, Scales and Set
Point Limits will delete all
profiles stored in the F4’s
memory.
The tenth character of your
model number determines
your RTD base resistance.
F4_ _-_ _ _ _-_ (1 to 4) R G
for 100
Ω
F4_ _-_ _ _ _-_ (5 to 8) R G
for 500
Ω
and 1k
Ω
Input
601 [1]
611 [2]
621 [3]
r/w
J (0)
100 Ω DIN
(11) for
100 Ω RTD
models
500 Ω DIN
(23) for
500 Ω or
1k Ω models
4 to 20mA
(13)
If Sensor is set to
thermocouple:
J (0)
K (1)
T (2)
E (3)
N (4)
C (5)
D (6)
PT2 (7)
R (8)
S (9)
B (10)
If Sensor is set to RTD
or Wet/Dry Bulb:
100 Ω DIN (11)
100 Ω JIS (12)
500 Ω DIN (23
500 Ω JIS (24))
1k Ω DIN (25)
1k Ω JIS (26)
If Sensor is set to
Process:
4 to 20mA (13)
0 to 20mA (14)
0 to 5V (15)
1 to 5V (16)
0 to 10V (17)
0 to 50mV (18)
If Analog Input 2 Sen-
sor is set to Process
and Analog Input 2 is
selected:
•Vaisala 0 to 5V** (19)
•Vaisala 0 to 10V (20)
•Vaisala 0 to 20mA**
(21)
•Rotronics 0 to 5V***
(22)
Type
Select the lineariza-
tion table to apply
to the sensor.
Active: Always. Input
600 [1]
610 [2]
620 [3]
r/w
Thermo-
couple (0)
Thermocouple (0)
RTD (1)
Process (2)
Wet Bulb-Dry Bulb* (3)
Off (4)
Sensor
Select the sensor.
Main > Setup > Analog Input x (1 to 3)
Analog Input x (1 to 3)
* A wet bulb at input 2 uses the input 1 value to calculate the rel-
ative humidity on channel 2. The humidify and dehumidify out-
puts (2A and 2B) are disabled when the input 1 temperature is too
low (32°F [0°C]) or too high (212°F [100°C]). The relative humidi-
ty display in the Main Page will display “RH Disabled” for a low
temperature error and “RH Disabled” for a high temperature error.
** The Series F4 provides temperature compensation for the
Vaisala HMM-30C Solid-state Humidity Sensor to calculate rela-
tive humidity on channel 2. The humidify and dehumidify out-
puts (2A and 2B) are disabled when the input 1 temperature is
too low (-40°F [-40°C]) or too high (320°F [160°C]). The relative
humidity display in the Main Page will display “RH Disabled”
for a low temperature error and “RH Disabled” for a high temper-
ature error.
*** The Series F4 provides temperature compensation for the
Rotronics Model H260 Capacitive Relative Humidity Sensor to
calculate relative humidity on channel 2. The humidify and de-
humidify outputs (2A and 2B) are disabled when the input 1
temperature is too low (-5°F [-20°C]) or too high (320°F [160°C]).
The relative humidity display in the Main Page will display “RH
Disabled” for a low temperature error and “RH Disabled” for a
high temperature error.
Setup Page Parameter Table
Modbus
Register
Range read/write Conditions for
Parameter Description (Modbus Value) Default [I/O, Set, Ch] Parameters to Appear