Hired-Hand Funnel Flow Fans: Fiberglass Pit Transition Fan Combo Installation (24 Funnel Flow Fan) - Manual

HIRED-HAND MFG., INC.
• 1733 County Road 68 • Bremen, Alabama 35033 • Phone 256-287-1000 • Fax 265-287-2000
Manual Part Number 4801-0041 Rev. 3-07 Page 1 of 2
Warning!
Disconnect all Electrical Power befor instaling the Pit transition Fan!
TOOLS REQUIRED PART NUMBERS
DESCRIPTION
The Fiberglass Pit Transition is used to mount a 24” fan and transition unit to control the air flow from a pump-out lid or similar
opening to horizontal exhaust. Figure 1 shows the overall dimensions of the Fiberglass Pit Transition (FPT).
Flat Head Screwdriver
Electric Drill
3/8”Nut Driver
TU_24 Transition Unit RTM (6612-0024)
Part Number Quan. Description
6612-0108 1 TU-24 Trans Unit Assy RTM
5001-6100 1 CRTN 24 TRANS 39.13 x 36.88 x 34
4801-0041 1 DIAG FG24" Trans Unit Install
IMPORTANT!
Locate packing slip and make sure that all listed parts are enclosed. If not, call your Hired-Hand distributor
immediately. Please read and understand all instructions in this manual before installing Pit Transition Fan.
Fiberglass Pit Transition Fan Combo Installation
24
"
Funnel Flow Fan
Figure 1 - Pit Transition Fan
!
!
38-15/16"
33-7/8"
2"
31-15/16"
36-3/4"
2" 2" 2"