Chapter one introduction, 1 operating environment, 2 about the system – LT Security LTAL130PM User Manual
Page 2: 3 installation on the desk, Installation on the desk
Chapter One Introduction
Please read this user manual carefully which will be helpful for your operation.
1.1 Operating environment
¾
Please do not place the device under bright and direct light as it will obviously influence fingerprint
information acquisition and may cause failed verification.
¾
The operating temperature of the device is -10℃–50℃. If possible, please operate the device
indoor since long-term operation outdoor is bad for the performance of the device. If it is a must to
operate it outdoor, it is suggested to work with support of sunshades or cooling equipments in
summer, and thermal facilities in winter.
1.2 About the system
¾
Fingerprint AT management system can be divided into two parts: fingerprint time attendance
(hereafter called device) and time attendance management software (hereafter called software).
¾
The device is mainly for fingerprint enrollment and attendance logs, while the software for managing
logs and generating statistics report according to the attendance settings.
¾
The communication ways between the device and PC where software is installed are USB.
Note: The device in this manual is LTAL130PM while softeware is time atendance management
software.
1.3 Installation on the desk
USB communication
and power cord
Installation on the desk
2