LumaSense Technologies LumaSoft Gas Multi Point 7860 - Manual (Page 34)

Chapter 3
_________________________________________________________________________
________________________________________________________________________
BE6027-12 LumaSoft Gas Software LumaSense Technologies A/S
7810 and 7860 Page 34 of 194
Make sure that the PROTECTED IP ADDRESS either is set to the IP
Address of your PC or set to 000:000:000:000.
Make a note of the IP Address of the 1412i/1314i/3434i device as
displayed in the TCP/IP settings.
Your Administrator can now open a DOS Command Prompt to check for
a ping reply from the IP Address of the 1412i/1314i/3434i device.
Figure 3.10 Ping reply from the 1412i/1314i/3434i device.