Source Green Heat SGH-1500 - Manual (Page 9)

9
IN THE BOX

INFRARED ZONE HEATING SYSTEM

REMOTE CONTROL

REMOTE CONTROL BATTERY

INSTRUCTION BOOKLET
1. Remote control signal sensor
2. Digital display: Indicates set desired room temperature
3. Power indicator light: Indicates that the heater is receiving power from outlet. Will flash when
powered “ON’
4. ON/OFF button: Powers the display on and off
5. Energy-saving mode indicator: Will be lit when energy-saving mode is engaged
6. Mode button: To select between High, Low, and Eco modes
7. Low Mode indicator light: Will be lit when Low Heat mode is engaged
8. Temp up button: To increase desired temperature
9. High Mode indicator light: Will be lit when High Heat mode is engaged
10. Temp down button: To decrease desired temperature
11. Timer indicator light: Will be lit when the Timer mode is engaged
12. Timer button: Used to engage timer mode and to set hour value for the timer
13. Fahrenheit indicator light: Will be lit when temperature displayed is in Fahrenheit
14. ℃/℉ Button: Alternates between Fahrenheit and Celsius
15. Celsius indicator light: Will be lit when temperature displayed is in Celsius
Air Outlet
Front Panel
Control Panel
Wheels
Remote Control
PRODUCT DIAGRAM
Control Panel (Ref Fig. 1 next page)