WEN 6510 oscillating spindle sander - Manual (Page 9)

Assembly and adjustments
Unpacking (Fig. 1)
Carefully unpack the spindle sander and all its parts, and compare against the list below. Do not
discard the carton or any packaging until the spindle sander is completely assembled.
WARNING: To avoid injury from accidental starting, turn switch OFF and remove plug
from power source outlet before making any adjustments.
A Spindle sander
B Sanding sleeves (6)
C Rubber drums (5)
D Throat plates (6)
E lower spindle washer (1)
F Upper spindle washers (3)
G Spindle lock nut
H Wrench
9