In-Situ smarTROLL Multiparameter Handheld Calibration Kit/Bubbler - Manual

Technical Note
Innovations in
Water Monitoring
Instruction Sheet
Innovations in
Water Monitoring
Page 1 Page 1
Kit Contents (0080830)
• Battery-powered air pump
• Large bubbler cup, tubing, check valve, and pinch
valve for calibrating the 100% dissolved oxygen
saturation point.
• Restrictor to accommodate the sub 2-inch TROLL
9500 instrument
• 2 alkaline D-cell batteries
• Sodium sulfite solution, 500 mL for calibrating the
0% dissolved oxygen point
• In addition to these items, you will need the plastic
calibration cup that came with the instrument for
calibrating the 0% dissolved oxygen point.
Kit Contents (0048580)
• Battery-powered air pump
• Large bubbler cup, tubing, check valve, and pinch
valve for calibrating the 100% dissolved oxygen
saturation point.
• 2 alkaline D-cell batteries
• Sodium sulfite solution, 500 mL for calibrating the
0% dissolved oxygen point
• Small calibration cup for calibrating the 0%
dissolved oxygen point.
Calibration Kit for the Aqua TROLL ® 400,
SMAR
TROLL™ MP and TROLL ® 9500 RDO ® Sensor
0080830 – for Aqua TROLL 400 Instrument and TROLL 9500 Instrument (sub 2-inch), SMAR TROLL™ MP
0048580 – for TROLL 9500 Instrument (sub 4-inch)