Dwyer BAP-K - Manual

Bulletin PC-BAP-K
The Model BAP-K Bin Aerator Pad Mounting Kit completely
eliminates the need to enter the bin to install or service aerators.
By cutting a 2-5/8” x 6-3/8” hole in the bin wall, the mounting kit
can be completely installed and serviced from outside of the bin.
After the initial hole has been cut, the bin aerator pad can be
mounted on the adapter assembly and inserted into the bin in less
than two minutes. There are no other holes to drill, tapping or
welding. The bin aerator pad is positively sealed and securely held
in place in the bin. Removal is just as simple and quick.
DWYER INSTRUMENTS, INC.
Phone: 219/879-8000 www.dwyer-inst.com
P.O. BOX 373 • MICHIGAN CITY, INDIANA 46361, U.S.A. Fax: 219/872-9057 e-mail: [email protected]
Specifications - Installation and Operating Instructions
Model BAP-K Bin Aerator Pad Mounting Kit
7-1/2
[190.50]
3-3/4
[95.25]
11/16
[17.46] 5/32
[3.81]
1/8 FEMALE NPT
FOR TANK NIPPLE
1/16˝ GASKET
MOUNTING BRACKET
3/16˝ GASKET
SPRING
STEEL
CLAMP
Ø1/2˝ OPENING
IN CENTER
OF CLAMP
2X WASHERS
RUBBER
GASKET
1/8 NPT X 2˝
TANK NIPPLE
3/4˝ NUT
MOUNTING HARDWARE
OPTIONAL BAP-K MOUNTING KIT
BAP AERATOR
PC-BAP-K:TEMPLATE 12/12/08 9:48 AM Page 1