Canon PowerShot D30 - Manual (Page 12)

Before Use
Basic Guide
Advanced Guide
Camera Basics
Using GPS
Functions
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Accessories
Appendix
Index
12
Before Use
Basic Guide
Advanced Guide
Camera Basics
Using GPS
Functions
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Accessories
Appendix
Index
Cautions After Using This Camera and
Camera Care
•
Rinse off the camera if there is liquid or sand on it after use. The liquid
may soil or corrode the camera, and wiping the camera when sand is on
it may scratch it.
•
After using the camera under water or in
sandy or muddy environments, promptly
rinse it well under fresh water, such as tap
water no warmer than 30 °C (86 °F).
Foreign material or salty residue on the
camera may corrode metal parts or cause
buttons to stick.
•
After washing the camera, dry it completely
by wiping it with a soft, dry cloth. After
washing and drying the camera, make sure
the buttons and covers do not stick when pressed or opened and closed.
•
To avoid damaging the waterproof seals and causing leaks, keep the
seals free of sand or other foreign material, and do not apply chemicals
or grease to the seals.
About the Waterproof Seals
•
Scratches or cracks in the waterproof seals could cause damage or
leaks. Contact a Canon Customer Support Help Desk for immediate
repair. The waterproof seal will be replaced on a chargeable basis.
Initial Preparations
Prepare for shooting as follows.
Attaching the Strap
z z
Thread the end of the strap through the
strap hole ( ), and then pull the other
end of the strap through the loop on the
threaded end ( ).