Anetsberger Brothers MX-7E - Manual (Page 26)

26
FR FR FR FR FRYER YER YER YER YER TR TR TR TR TROUBLESHOO OUBLESHOO OUBLESHOO OUBLESHOO OUBLESHOOTING GUIDE TING GUIDE TING GUIDE TING GUIDE TING GUIDE
(Continued)
HEATING indicator is
off, while burners are
aflame. 1. HEATING indicator wiring problem.
2. Indicator has failed.
1. Repair indicator wiring if a
problem is detected. Other-
wise, the indicator is defective
and should be replaced.
2. Replace the HEATING indica-
tor.
Indicator portion of
POWER switch is
unlighted, while fryer is
operating. 1. POWER indicator wiring problem.
2. POWER indicator has failed.
1. Repair POWER switch/indica-
tor wiring, if a problem is
detected.
2. Replace the POWER switch/
indicator as a unit.
PROBLEM CAUSE REMEDY
Fryer does not begin to
operate when ON
portion of POWER
switch is pressed. 1. Switch portion of POWER switch has
failed.
1. Check switch wiring for prob-
lem; repair as necessary. If no
wiring problem is detected,
replace the faulty POWER
switch/indicator as a unit.
NOTE: A Parts List for each Anets Fryers is among the items shipped with each fryer. If an
additional copy of this list is needed, please contact the factory as directed on the back
cover.