LG DLEX5101V - Manual (Page 38)

BEFORE CALLING FOR SERVICE
(cont.)
FLOWSENSE
indicator light is on
during the drying
cycle
• Ductwork is too long or has
too many turns/restrictions.
• Significant blockage of the
ductwork due to lint buildup
or debris.
• Install a shorter or straighter duct run. See the
Installation Instructions.
• Ductwork should be checked/cleaned soon.
Dryer can be used in this condition, but drying times
may be longer.
Problem Possible Causes Solutions
Steamdoesn’t
generate but no error
code is shown.
• Water level error. • Unplug dryer and call for service.
Garments still
wrinkled after
STEAMFRESH ™ .
• Too many or too different
types of garments in dryer.
• Small loads of 1 to 5 items work best.
• Load fewer garments. Load similar-type garments.
There are no creases
left on garment after
STEAMFRESH ™ .
• The function of this cycle
is to remove wrinkles from
fabric.
• Use an iron to make creases.
Garments have
static after REDUCE
STATIC.
• This is normal. • Depends on individual moisture level in skin.
Garments are too
damp or too dry after
REDUCESTATIC.
• Correct drying options not
selected.
• Select load weight manually before starting
REDUCE STATIC option.
Garments are not
uniformly damp after
EASYIRON.
• This is normal. • Depends on the amount or type of garments.
Water drips from door
duringSteamCycle.
• This is normal. • This is steam condensation on door surface.
Steamisnotvisible
duringSteamCycle.
• This is normal. • Steam vapor is difficult to see when the door is
closed.
Drum does not turn
duringSteamCycle.
• This is normal. • The drum is turned off so that the steam vapor
remains in the drum.
Cannot see steam
vapor at the
beginning of cycle.
• This is normal. • Steam is released at different stages of the cycle
for each option.
• MORE TIME button pressed.
Odors remain in
clothing after
STEAMFRESH ™ .
• STEAMFRESH ™ did not
remove odor completely.
• Fabrics containing strong odors should be
washed in a normal cycle.
The display shows. • Pressing the MORE TIME button several times will
set the cycle for a large load such as a comforter.
38
MFL67408105_en_111115.indd 38 2011.11.15 3:41:50 PM