Troubleshooting, Troubleshooting issues – HP ProLiant Support Pack User Manual
Page 13
Troubleshooting 13
Troubleshooting
Troubleshooting issues
•
If a failure occurs, use the console keyword at the boot prompt to drop into a debug console. To
manually execute the HP BladeSystem Firmware Deployment Tool, run ./hpsum -s.
•
Before using the ISO, validate the MD5 checksum against the value on the download page to ensure
a good image has been downloaded correctly.
•
Servers with equal or greater than 64 GB if memory might stop responding while booting SmartStart
8.25 or earlier, Firmware Maintenance CD 8.50 or earlier, or HP BladeSystem Firmware
Deployment Tool CD 1.60. At the boot prompt, enter the bdcd mem=16g parameter. You must enter
this parameter for each server blade and within four seconds after the boot prompt appears
following the server POST.