HP LaserJet Pro 200 color MFP M276nw - Manual (Page 157)

Print when a toner cartridge is at estimated end of
life
Supply-related notifications are communicated on the product control panel, Desktop Alerts, software
applications, and network alerts.
A <Supply> Low message—where <Supply> is the color toner cartridge: The product indicates when
a supply level is low. Actual cartridge life remaining might vary. Consider having a replacement
available to install when print quality is no longer acceptable. The supply does not need to be replaced
now.
A <Supply> Very Low message—where <Supply> is the color toner cartridge: The product
indicates when a supply level is very low. Actual cartridge life remaining might vary. Consider having
a replacement available to install when print quality is no longer acceptable. The supply does not need
to be replaced now unless the print quality is no longer acceptable. Once an HP supply has reached
Very Low, HP’s Premium Protection Warranty on that supply has ended.
Print-quality problems can occur when using a toner cartridge that is at its estimated end of life. The
supply does not need to be replaced at this point in time unless the print quality is no longer
acceptable.
NOTE: Using the Continue setting allows printing beyond Very Low without customer interaction and
can result in unsatisfactory print quality.
Enable or disable the At Very Low settings
NOTE: This section applies to the HP LaserJet Pro 200 color M276nw MFP model only.
You can enable or disable the default settings at any time, and you do not have to re-enable them
when you install a new toner cartridge.
1. From the Home screen on the control panel, touch the Setup button.
2. Open the following menus:
● System Setup
● Supply Settings
● Black Cartridge or Color Cartridges
● Very Low Setting
3. Select one of the following options:
● Select the Continue option to set the product to alert you that the toner cartridge is very low,
but to continue printing.
● Select the Stop option to set the product to stop printing (including printing faxes) until you
replace the toner cartridge.
● Select the Prompt option (the default option) to set the product to stop printing (including
printing faxes) and prompt you to replace the toner cartridge. You can acknowledge the
ENWW Print when a toner cartridge is at estimated end of life 141