HP StoreAll Storage - Manual (Page 69)

Attributes tab. For users, you can set the UID, login shell, home directory, and primary group. For
groups, set the GID.
Consolidating SMB servers with common share names
If your SMB servers previously used the same share names, you can consolidate the servers without
changing the share name requested on the client side. For example, you might have three SMB
servers, SRV1, SRV2, and SRV3, that each have a share named DATA. SRV3 points to a shared
drive that has the same path as \\SRV1\DATA; however, users accessing SRV3 have different
permissions on the share.
To consolidate the three servers, we will take these steps:
1. Assign Vhost names SRV1, SRV2, and SRV3.
2. Create virtual interfaces (VIF) for the IP addresses used by the servers. For example, Vhost
SRV1
has VIF 99.10.10.101 and Vhost SRV2 has VIF 99.10.10.102.
3. Map the old share names to new share names. For example, map \\SRV1\DATA to new
share srv1-DATA, map \\SRV2\DATA to new share srv2-DATA, and map \\SRV3\DATA
to srv3-DATA.
4. Create the new shares on the cluster storage and assign each share the appropriate path. For
example, assign srv1-DATA to /srv1/data, and assign srv2-DATA to /srv2/data.
Because SRV3 originally pointed to the same share as SRV1, we will assign the share
srv3-DATA
the same path as srv1-DATA, but set the permissions differently.
5. Optionally, create a share having the original share name, DATA in our example. Assign a
path such as /ERROR/DATA and place a file in it named SHARE_MAP_FAILED. Doing this
ensures that if a user configuration error occurs or the map fails, clients will not gain access
to the wrong shares. The file name notifies the user that their access has failed.
Consolidating SMB servers with common share names 69