HP OmniBook 800 Notebook PC - Manual (Page 7)

1-7
To connect the CD-ROM drive to your OmniBook
C A U T I O N Before you turn on the CD-ROM drive for the first time, remove the cardboard
shipping insert from inside the CD compartment.
1. Make sure the CD-ROM drive has power—see “To use the power cable” or “To
use batteries in your CD-ROM drive” earlier in this section.
2. Turn on the CD-ROM drive by pressing the POWER switch. A blinking “on”
appears on the display of the CD-ROM drive.
3. Connect the 50-pin end of the SCSI adapter cable to the CD-ROM drive’s SCSI
connector. (If you’re also connecting other SCSI devices, see “Connecting
Several SCSI Devices” farther below.)
POWER Switch