HP 2000SA G2-Modular-Smart-Array - Manual (Page 33)

3. Click Run Now to run the newly created discovery task. Click View Task results to see the discovery
processing flow.
Identifying an MSA2000 G2 Array
The identification process follows automatic or manual system discovery and identifies the following
information about the discovered system:
• Management protocol the system uses (for example SNMP or WBEM).
• Type of system (for example, storage)
• Product name of the system
• Product serial number
• Associations, such as iLO in server
To identify an MSA2000 G2 Array
1. Using the Search bar on the top left hand corner of HP SIM window, search for the Proxy Provider
IP address (same as the one used to discover the Proxy Provider). Click the IP address to navigate
to the Identification page of the proxy server.
2. In the Product Description pane, click the link associated with the Managed Systems item, as
shown in
Figure 17 , page 33.
Figure 17 Link to the Identification page of the managed MSA2000 G2 Array
. 3. Click the Tools & Links tab to find useful information, such as the SMU for the MSA2000 G2
Array and the data collection report.
Subscribing to and viewing events
With HP SIM, you can subscribe to WBEM events. MSA2000 G2 Proxy Provider currently only
supports hardware alert indications.
To subscribe and view events:
1. Click the EventsSubscribe to WBEM events link under the Options tab.
MSA2000 G2 SMI-S Proxy Provider User Guide 33